Sciences pour la conception, l'Optimisation et la Production

Conception Produit Process

Laboratoire des Sciences pour la Conception, l'Optimisation et la Production de Grenoble

> GSCOP_Recherche > GSCOP_ConceptionProduitProcess

Projet GEOCAM-ANR

Projet GEOCAM: Maitrise géométrique des pièces produites par fabrication additive métallique

Les partenaires du projet

G-SCOP – UGA
Institut de Mécanique et d’Ingénierie de Bordeaux – ENSAM

Contexte et Objetifs du projet

The new technical possibilities offered by the Additive Manufacturing process (AM) of metallic materials set the stage for designing and manufacturing new parts with complex and innovative shapes. At this stage of the process development, it is hard to guaranty the quality of part (ie. material health, roughness, geometric defects).

The project focuses on the control of the overall geometry quality of the workpiece manufactured by SLM (Selective Laser Melting) and Electron Beam Melting (EBM) processes. This investigation field corresponds to the major originality of this project since the classical research activities deals with micrometric or macrometric scales of defects. The geometrical distortions are mainly due to the coupling between the thermal gradients imposed during manufacture and the shape evolution during the cooling phase and the successive layer deposits generating important residual stress states. The characteristics of the materials, the relative location of the part into the FA machine (close to the walls), the characteristics of the powders and the laser paths are all technological parameters that drastically modify the physical and thermomechanical phenomena involved.

Informations sur ValoRABES

Porteur du projet: Fréderic Vignat et François Villeneuve
Lancement projet: Septembre 2017
Durée: 1/9/17 au 1/9/21
Organisme de financement : ANR

mise à jour le 18 décembre 2018

46, avenue Félix Viallet - 38031 Grenoble Cedex 1 - France
Tél +33 (0)4 76 57 50 71 - Fax +33 (0)4 76 57 46 95